DURAPOL 1044 Cork & Timber Gloss

• Highly abrasion resistant
• Excellent gloss
• Excellent flow and levelling results in smooth finish
• Enhances the natural colour of the timber

Build : High
Sandability : Excellent
Levelling & Flow : Excellent
Coverage : Basecoat: Timber: 6-8m2 per litre. Cork & Particleboard: 5-7m2 per litre. Subsequent Coats: 8-12m2 per litre - coverage is dependent upon the porosity of the substrate
Dry Time : Hard Dry: Overnight. Full Cure: 10-14 days
Clean Up : Polycure Super Cleaning Solvent
Packaging : 20L
Product Code : 5844-9-20

Data Sheet

Safety Data Sheets

Slip Certificate

Timber Floors What to Expect

Surface Prepartion:

Preparation: Preparing the floor to a professional standard is essential to achieve the best results. Fill all nail holes with a water based putty, allow to dry. Sand uncoated floor with 120-150 grade sandpaper or screenback on a flexible pad to ensure floor is uniformly dull with no sanding scratches, nibs or fur. Vacuum thoroughly. Take care to avoid scratching the surface.

Mixing: Stir thoroughly before use.

Tools: 6mm nap roller or applicator and a high quality brush.

Application:

1. Timber - Apply a liberal first coat of DURAPOL 1044 or FASTASEAL 3030, 3535 or 3540 Sealer using a 6mm mohair roller and good quality brush to cut in. If using FASTASEAL allow to dry for 45 minutes before sanding, for all other coatings allow to dry overnight (min 8 hours to max 24 hours).
2. Apply a second coat of DURAPOL 1044. Allow to dry overnight (min 8 hours to max 24 hours).
3. Thoroughly sand floor with 150-180 grade sandpaper or screenback, remove all nibs, fluff and fur. Vacuum all dust.
4. Apply the final coat of DURAPOL 1044 Gloss.

Interior use only. Timber, particleboad, cork or concrete.